שמן 10W40 לרכב כבד
High-performance low-friction engine oil
Properties
FOSSER Drive Turbo plus LA is a synthetic high-performance low-friction engine oil for commercial vehicles. The product is a low-SAPS product with significantly reduced sulphated ash, phosphorus and sulphur content. Thanks to the use of high-performance additives, the oil offers excellent oxidation and high-temperature stability. The good dispersing properties of the product prevent deposits in the engine and on pistons that could otherwise impair the performance of the engine. At very low ambient temperatures a reliable cold start and fast oil supply to all lube points is guaranteed. The oil is able to cope with all extreme conditions and to reduce friction loss and wear. It also improves the efficiency of engines as both oil and fuel consumption is reduced and the service life of the engine is prolonged.
Use instructions
FOSSER Drive Turbo plus LA has been specially developed for the economic supply of emission-optimised engines (Euro V und VI) with exhaust gas aftertreatment systems. FOSSER Drive Turbo plus LA is suitable for year-round use and ensures that exhaust gas aftertreatment systems can work efficiently during a significantly prolonged service life.
Oil change intervals might be extended to over 100,000 km, depending on the manufacturer instructions.
- Specifications: ACEA E6/E7/E9 • API CK-4
- Approvals: MB-Freigabe 228.51, MAN M 3477/ MAN M 3271-1, Volvo VDS-3, Mack EO-N, Renault VI RLD-2
- Recommendations*: Scania Low Ash, MTU Type 3.1, Volvo CNG, DAF HP-2, Cummins CES 20086, Deutz DQC IV-18 LA, CAT ECF-3, Mack Eos 4.5, Renault Truck RXD/RGD, DDC93K222, JASO DH-2, Renault VI RLD-3 Volvo VDS 4.5, Volvo VDS 4.5
| TYPICAL VALUES | METHOD | UNIT | FOSSER Drive Turbo Plus LA |
| SAE Class | DIN 51 511 | – | 10W-40 |
| Density at 15°C | DIN 51 757 | kg/m³ | 857 |
| Viscosity at 40°C | DIN 51 562 | mm²/s | 97,3 |
| Viscosity at 100°C | DIN 51 562 | mm²/s | 15,3 |
| Viscosity index (VI) | DIN ISO 2909 | – | 166 |
| Viscosity at -25°C | DIN 51 377 | mPa.s | 4780 |
| Pour point | DIN ISO 3016 | °C | -36 |
| COC flash point | DIN ISO 2592 | °C | 230 |
| TBN | DIN ISO 3771 | mg KOH/g | 11,1 |
| sulfated ash | DIN ISO 51575 | mass. % | 0,95 |
| Sulphur content | mass. % | 0,23 | |
| phosphorus content | mass. % | 0,06 |
The above values may vary within commercially accepted tolerances.
* Meets the requirements of the OEM manufacturer.
